Sanifloor + 1

Sanifloor + 1

Designed specifically where floor drainage is required but where space underneath is very limited e.g. wet rooms. This two part kit with a powerful shower waste pump and a choice of four waste designs. It can pump up to 3m vertically or 30m horizontally. Higher flow rate means it can be used with powerful ‘rain head’ showers.

  • Suits wet rooms and low level shower trays, ideal for high flow applications
  • Pump and waste inlet can be up to 3m apart horizontally
  • Pump can be sited up to 300 mm above the gully
  • Dual function - sucks waste up from the gully and pumps waste water away up to 3m vertically or 30m horizontally
€0.00


Application

  • Walk-in shower
Where to buy?
Product sheet

Your documents - Individual

The Sanifloor + 1 is an ideal pumping solution for tiled floors within a wet room environment. It is capable of pumping a standard electric or gravity mixer shower. This two part kit contains a shower pump and 4 differing wastes depending on application needed. The Sanifloor + is now wireless making it even easier to install. The pump can be...

See more

Sanifloor+ 1 datasheet

Dimensions l x w x h (mm)
295 x 191 x 164

*Packing list: Sanifloor + 1 pump, dedicated drain, check valve, connectors. 

Ref: EAN 3308815076232

Sanifloor + 1
Number of inlets available 1
Diameter of inlets 16 mm
Recommended discharge diameter 32 mm
Motor consumption 400W
Supply voltage 220-240V/50Hz
Electrical class I
Protection index IP20
Max. horizontal discharge 30 m
Max. vertical discharge 3 m
Shower tray height 0 cm
High drainage rate 30 L/min at 1m
Maximum absorbed current 1.7 A
Maximum temperature of incoming water 35 °C
Total height 68 mm
Materials used for the drain ABS / stainless steel
Outlet diameter of the drain 16 mm

Related articles on blog

Sanifloor + 1

Sanifloor + 1

  • Walk-in shower
Where to buy?
Product sheet